Alphacool, Eisfluegel Aurora flow indicator "HighFlow" with speedometer signal
The Alphacool Eisfluegel Aurora "HighFlow" flow indicator can easily be installed anywhere in the water cooling circuit and offers outstanding lighting. The Eisfluegel is designed for high flow systems and can display a water flow of 70 to 300 L/h. The speed of the Eisfluegel Aurora is read out via the 3-pin connection at a corresponding fan connection on the mainboard. This can then be used to determine the flow. Since the Eisfluegel is made of acrylic, the flow can also be recorded optically very well. Two G1/4" threads are available for installation in a water circuit. Which is used as IN or OUT is up to the user. The Eisfluegel flow sensor is light and can therefore be freely suspended in the system. On the lower side of the ice wing there are two screw connections for the enclosed M3 screws. This allows the flow sensor to be placed anywhere in the housing. The scope of delivery also includes a small, self-adhesive Velcro mat, which can also be used to mount the ice wing. The ice wing has 8 addressable digital RGB LEDs that run around the impeller and form a circle. Since each LED can be controlled individually, any desired effects can be created by the respective controller. The connection is made via a 3-pin JST connector, which makes the Eisfluegel compatible with all other Digital RGB products from Alphacool. For example, if you prefer direct control via the mainboard, you can use the included 3-pin 5V adapter.
Type | flow indicator | ||
colour | transparent | ||
EAN | 4250197174640 | ||
Manufacturer no. | 17464 | ||
kind | flow indicator | ||
use | for water cooling with G 1/4 connection | ||
Material heatsink | acrylic | ||
Further information | Connectors: 2x G1/4", digital RGB-LED connector: 3-pin JST (adapter to 3-pin 5V is included), speed sensor connector: 3-pin fan connector | ||
a notice | 1. A separate 3-pin female to 3-pin female connection cable is required to connect the flow sensor to the mainboard. 2. The Eisfluegel Aurora "HighFlow" flow indicator only works from a flow rate of 70 L/h. | ||
Accesories | present | 2x M3x5 screws, 1x Velcro tape, 1x 3-pin JST to 3-pin 5V digital RGB adapter cable, 1x 3-pin fan connector cable | |
needed | 3-pin female to 3-pin female connection cable | ||
Dimensions | In total | Width: 45mm x Depth: 45mm |
Brand
Alphacool
Dimensions
Width: 45mm x Depth: 45mm
Type
Flow indicator
Color
Transparent
No reviews found