Homematic IP, Smart Home roller shutter actuator for brand switches (HmIP-BROLL)
The Homematic IP roller shutter actuator for brand switches enables convenient control of connected AC motors for roller shutters or awnings. In this way, electrically operated blinds can be raised or lowered automatically. The roller shutters or awnings are operated very conveniently via the rocker switch on the switch, via radio remote control or via the Homematic IP app. The roller shutter actuator is suitable for installation in a flush-mounted box for switches from a wide variety of manufacturers. The adapters for different switch series enable a cost-saving replacement of switches from common manufacturers with an intelligent Homematic IP installation. The installation effort is reduced to a minimum by using components from the existing or planned switch series and wiring. The design or colors and surfaces of switch series that have already been installed remain unchanged, as existing frames and rockers can continue to be used.
Type | Switch | ||
EAN | 4047976513222 | ||
Manufacturer no. | 151322A0 | ||
smart home | Alexa, HomeMatic IP | ||
device properties | annotation | Relay: 1x changeover contact, 1x closer; Cable type and cross-section: Rigid and flexible cable, 0.75 - 1.5 mm² | |
service | Rocker switch, Homematic IP app, wireless remote control (optional) | ||
device type | home automation | ||
device type | Switch | ||
Assembly | In switch boxes (device boxes) according to DIN 49073-1 | ||
power supply | 230 V/50 Hz, 500 VA switching capacity | ||
area of application | Inside | ||
Degree of protection | IP20 | ||
electricity | recording | 2200mA | |
consumption | 0.2W | ||
temperature range | operation | 0 - 50 °C | |
connection type | Wireless | ||
Wireless | frequency | 868MHz | |
Range | 220 m | ||
a notice | A neutral conductor must be present for the installation. | ||
feature | Individual configuration of a weekly profile enables time-controlled raising and lowering of roller shutters/awnings; Convenient control depending on sunrise and sunset; Lock-out, storm and heat protection can be implemented in combination with the Homematic IP app and other components; Easy commissioning thanks to automatic calibration run | ||
Further information | Can be integrated into the most common designs from leading switch manufacturers with the appropriate adapter: Busch-Jaeger, Gira, Merten, Berker, Jung, düwi/Popp, Kopp | ||
Accesories | present | 2 screws 3.2 x 15 mm, 2 screws 3.2 x 25 mm, instruction manual | |
Dimensions | Width: 71mm x Height: 71mm x Depth/Length: 37mm | ||
weight | 58 grams |
Brand
Homematic IP
Dimensions
Width: 71mm x Height: 71mm x Depth/Length: 37mm
Frequency
868MHz
Range
220 m
Weight
58 grams
Type
Switch
No reviews found